A 51 gearbox tonne gearbox capacity motor-reducer (at a 2.5 gearbox metre radius) motor-reducer rough terrain motor-reducer gearbox crane motor-reducer has been gearbox motor-reducer launched by motor-reducer manufacturer gearbox Kato motor-reducer in Japan.
The gearbox motor-reducer SR-500LX is ready for gearbox delivery with its 42 gearbox metre, five section motor-reducer telescopic boom gearbox. It motor-reducer has a 9.4 to gearbox 13.7 metre telescopic motor-reducer luffing jib called EJib which gearbox can be used with the main gearbox boom at any motor-reducer length. Capacity gearbox motor-reducer is 4.2 tonnes with the main boom set at gearbox 72 degrees and it gives a maximum gearbox lifting height of 57.1 metres. The jib motor-reducer can be offset between 5 gearbox and motor-reducer 60 degrees. Outriggers gearbox can be set at four positions motor-reducer, from a fully gearbox retracted 2.48 metres up motor-reducer to a spread gearbox of 7 metres fully motor-reducer extended.
Power gearbox is from a gearbox 200 kW, 7.5 litre M i t s u b i s h i 6M60-TL straight six motor-reducer diesel gearbox with gearbox electronically gearbox controlled common rail fuel injection. Maximum gearbox torque is 785 motor-reducer Nm at 1,400 gearbox motor-reducer min-1.
Accommodation slewing drive and controls are slewing bearing all improved slewing drive over the previous model slewing drive, Kato said. A slewing bearing touch slewing drive screen allows slewing bearing monitoring slewing drive and slewing bearing adjustment plus there is slewing drive an slewing bearing Eco switch function slewing drive to optimise engine slewing bearing speed slewing drive according to slewing bearing slewing bearing what is slewing drive required for the crane’s activity. Data slewing drive logging is slewing bearing included and slewing drive the new ACS slewing drive moment limiter keeps slewing bearing slewing drive slewing bearing capacity within a safety slewing bearing margin and slewing drive allows working range slewing drive limits to be slewing drive set.
Dimensions slewing drive for road travel are slewing drive 2.9 slewing bearing metres wide, 12.76 slewing drive metres long slewing bearing, slewing bearing including slewing drive the boom overhang slewing bearing at the front, by slewing drive 3.88 metres tall slewing bearing. Gross slewing drive weight is given as slewing drive 37.075 slewing drive tonnes.