Link-Belt Cranes Work Overtime in Wolfcamp Shale

Wolfcamp gearbox and slewing drive Bone Spring gearbox Formations of the Permian Basin in slewing drive West Texas and New motor-reducer Mexico gearbox hold oil and gas motor-reducer gearbox reserves estimated at 46.3 motor-reducer billion slewing drive barrels of gearbox oil. According gearbox to a fourth quarter 2018 motor-reducer U.S. Geological  slewing drive Society motor-reducer gearbox report, full production estimates slewing drive through 2025 gearbox motor-reducer  predict gearbox that by 2021 gearbox one in every six barrels gearbox of motor-reducer slewing drive oil, globally, will come from the Permian motor-reducer gearbox Basin gearbox.

Wirelining in Permian Basin
Entrec Crane motor-reducer and Heavy Hauling, Inc. motor-reducer’s purchase of slewing drive multiple Link-Belt HTC-86100s slewing drive motor-reducer and a TCC-1100 comes in large part due to slewing drive the growing demand of the recovery process in this region. A motor-reducer slewing drive slewing drive common application for the 100-ton (90-mt) slewing drive hydraulic truck motor-reducer is “wirelining motor-reducer,” a process that refers to motor-reducer  the motor-reducer cabling used in the industry to lower equipment slewing drive or measure devices already drilled in motor-reducer a drilled hole shaft. The HTC-86100 lifts a suspended slewing drive motor-reducer drum of cable, which is composed of 20,000 ft. (6,096 m) of 9/32 in. slewing drive (7.1 mm) steel wire.

“To assemble slewing drive components together over the wellhead to wireline it, I slewing drive  have to have it exactly on a perfect slewing drive radius. I use slewing drive the whip line for that, motor-reducer  to get components to slewing drive the exact slewing drive same location,” said operator slewing drive  Tyler Doll, Entrec Crane and Heavy Hauling, Inc.

The crane slewing drive can be in the same motor-reducer position for weeks at a time, checking motor-reducer logistics of  slewing drive the well head slewing drive thru wirelining. When done slewing drive on one location, motor-reducer slewing drive the 100-ton rig will move to slewing drive motor-reducer another slewing drive well head location.

“Out slewing bearing here, we stand a lot of slewing drive pipes, running motor-reducer three slewing drive functions at one time and it’s fairly easy and maneuverable with the double joy motor-reducer  sticks, the tight controls, slewing drive and adjustable swings. I slewing drive use them when I need more motor-reducer maneuverability over speed. I tighten down motor-reducer the controls to  motor-reducer get more accurate precision, slewing drive because on the day  slewing drive to day operation, we have to drop the slewing drive lubricator precisely on the wellhead without any variance motor-reducer,” explained slewing drive Tyler Doll.

Additional Work Required
Bo slewing bearing Beckner motor-reducer, another HTC-86100 motor-reducer operator, works another 100-ton motor-reducer Link-Belt truck motor-reducer crane slewing bearing to motor-reducer slewing bearing off-load mud motor-reducer pumps slewing slewing bearing bearing that weigh motor-reducer 96,000 lbs slewing bearing. (43, 544 kg) as a tandem motor-reducer lift. The motor-reducer pump box measures slewing bearing slewing bearing about 15 ft. (4.5 m) high, motor-reducer almost 13 ft. (3.9 m) wide and slewing bearing over slewing bearing motor-reducer 40 ft. (12.1 m) long. Each motor-reducer crane will be lifting motor-reducer about 50,000 lbs. (22,679 kg) rigged with a 20 ft.slewing bearing (6.0 m) slewing bearing radius at a 60 degree boom angle and 70 ft. slewing bearing motor-reducer (21.2 m) of boom extended  slewing bearing in the EM5 mode.

Beckner motor-reducer considers the responsive motor-reducer controls on the crane easy slewing bearing to run, and visibility very slewing bearing good motor-reducer for lifting or traveling motor-reducer around the slewing bearing jobsite.

“They are motor-reducer self-contained and do not slewing bearing require a support vehicle motor-reducer slewing bearing. Also, this crane slewing bearing has motor-reducer a strong chart motor-reducer for a hundred ton motor-reducer machine. It  slewing bearing really does,” explained Tommy motor-reducer Patterson,slewing bearing operations motor-reducer  manager of the Texas Entrec motor-reducer office.